4-Port 10/100/1000BASE-T + 2- Port 100/1G/2.5GBASE-X SFP
4-Port 10/100/1000BASE-T + 2- Port 100/1G/2.5GBASE-X SFP
Tuotekoodi: IGS-620TF
Sähkönumero:
Toimituskulut alkaen 15,00 €
Nouto myymälästä 0 €
165,41 €
207,59 € (ALV 25.50 %)
Kirjaudu sisään nähdäksesi nettohintasi
Flexible, Reliable and Industrial-grade Network Distance Extension Solution
PLANET IGS-620TF is an Industrial 6-port full Gigabit Ethernet Switch providing non-blocking wire-speed performance and great flexibility for Gigabit Ethernet extension in harsh industrial environment. It provides 4-port 10/100/1000BASE-T RJ45 copper and 2 extra 100/1000/2500BASE-X SFP fiber optic interfaces delivered in an IP30 rugged strong case with redundant power system. The IGS-620TF is well suited for applications like deploying surveillance system, and securing control and wireless service in climatically demanding environments with wide temperature range from -40 to 75 degrees C.
PLANET IGS-620TF is an Industrial 6-port full Gigabit Ethernet Switch providing non-blocking wire-speed performance and great flexibility for Gigabit Ethernet extension in harsh industrial environment. It provides 4-port 10/100/1000BASE-T RJ45 copper and 2 extra 100/1000/2500BASE-X SFP fiber optic interfaces delivered in an IP30 rugged strong case with redundant power system. The IGS-620TF is well suited for applications like deploying surveillance system, and securing control and wireless service in climatically demanding environments with wide temperature range from -40 to 75 degrees C.
Physical Port
Four 10/100/1000BASE-T RJ45 ports with auto MDI / MDI-X function
Two SFP interfaces, supporting 100/1000/2500BASE-X transceiver type auto detection
Fiber Port Redundancy
Automatically detects link status and redundancy on dual ports with the same connector type.
Only primary port is active at a time, while the backup port is blocked.
When primary port link failure occurs, the traffic will swap to backup port automatically.
Once the primary-port status is back to link up, the traffic will swap from backup port to primary port.
Layer 2 Features
Supports auto-negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode
High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
9K Jumbo Frame size support
Backplane (Switching Fabric): 18Gbps
Integrated address look-up engine, supporting 4K absolute MAC addresses
Automatic address learning and address aging
IEEE 802.1Q VLAN transparency
CSMA/CD Protocol
Industrial Case and Installation
Slim IP30 metal case protection
DIN-rail, wall-mount or side wall-mount design for redundant power design
12 to 48V DC, redundant power with reverse polarity protection
AC 24V power adapter acceptable
Supports 6000 VDC Ethernet ESD protection
- 40 to 75 degrees C operating temperature
Four 10/100/1000BASE-T RJ45 ports with auto MDI / MDI-X function
Two SFP interfaces, supporting 100/1000/2500BASE-X transceiver type auto detection
Fiber Port Redundancy
Automatically detects link status and redundancy on dual ports with the same connector type.
Only primary port is active at a time, while the backup port is blocked.
When primary port link failure occurs, the traffic will swap to backup port automatically.
Once the primary-port status is back to link up, the traffic will swap from backup port to primary port.
Layer 2 Features
Supports auto-negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode
High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
9K Jumbo Frame size support
Backplane (Switching Fabric): 18Gbps
Integrated address look-up engine, supporting 4K absolute MAC addresses
Automatic address learning and address aging
IEEE 802.1Q VLAN transparency
CSMA/CD Protocol
Industrial Case and Installation
Slim IP30 metal case protection
DIN-rail, wall-mount or side wall-mount design for redundant power design
12 to 48V DC, redundant power with reverse polarity protection
AC 24V power adapter acceptable
Supports 6000 VDC Ethernet ESD protection
- 40 to 75 degrees C operating temperature
- Tuotekoodi: IGS-620TF